I am taking the tower, monitor, printer, mouse, keyboard etc. to recycling on Mon…..I just wanted to make sure there wasn’t something else that I am supposed to yank out….
Yeah…the hard drove is the rectangular case inside that has a spindle or small circular indentation on top, and a hub on the bottom. Usually the circle measures 2.5” or 3.5” in diameter. If possible as glial has recommended smash it, then take the disc platters and drill holes in them with a power drill to resemble Swiss cheese. That will render them unrecoverable (I’ve heard stories of the individual platters transplanted into new hard disk chassis and data extrapolated).
A less intrusive and cleaner way to get rid of your data, rather than smashing it would be to wipe it. Use DBAN and use it’s highest settings with the most passes. If you don’t want to spend the time doing that, if you have a large magnet of some sort run that all around the hard drive. That destroys the data as well and is used by the military for most every hd they use – although they do use a special magnet for it.
Thermite is a mixture of different chemicals that burns at a really high temperature. It would completely melt your harddrive, disc drive, and floppy drive, if you put thermite on them. Other parts of your computer are fine, they don’t save any important data.
Remove the disk drive, give the circuit board side a good hit with a hammer, and then dispose of it with your regular household garbage. Simple, easy, safe.
The fact that your identify might still be salvageable from the drive is correct. But if you are concerned about that, then be sure to look up when you are outdoors…somebody might drop a piano from an airplane and it could hit you.
OK. The surgery was a success! I have the hard disk drive box. (and…....ewwwww…..was it filthy dusty in there! Yuck!)
I will worry about the acutal destruction of the hard drive later….but I will do it….I was most concerned w/ getting out whatever I need to before taking it to the recycling center tomorrow. Thanks to all.