This method is BY FAR the easiest way to remove your tint. It requires NO razorblades unless you WANT to use one. This greatly reduces the mess involved.
Took me about 90 minutes, start to finish for all 5 windows.
Things you need:
Fabric Steamer
– I bought one from Walmart for $20
Beer
Things you may want to use:
Towel
– For rubbing off excess glue, if you pull to hard.
Razor Blade
– In place of towel, works better but somewhat of a mess.
You want to go at this very easily, so you dont pull the tint off the glue, but make them come off the window as one piece. The glue is very easy to get off with this method, but you shouldn’t have to at all.
Roll your window down a hair for some room. Steam the corner of the window, hold steamer about 1–2 inches away for about 30–60 seconds. Use your finger nail to pick at the edge to lift the tint.
Keep peeling away at the tint, be sure not to pull too hard and separate the tint and glue!
Keep pulling until you’ve got the tint in one corner. Go lightly so you don’t rip it or cause the glue to stay on the glass.
i didnt write this review xnick did on naioa.com